发布时间: 2017-11-25 17:31:50
配置命令:
R1:
access-list 1 permit 1.1.1.1 //匹配1.1.1.1路由
route-map community permit 10
match ip address 1 //匹配ACL 1的路由
set community local-AS //添加社团属性值为不通告出联邦小AS
router bgp 1
neighbor 12.1.1.2 send-community //告诉邻居识别社团属性
neighbor 12.1.1.2 route-map community out //调用在EBGP邻居出方向
R2:
Router bgp 64523
neighbor 3.3.3.3 send-community
查看社团属性